Pioneer GM-D9500F Owner's Manual - Page 14

Appendix Additional information Specifications Power source 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system Negative type Current consumption 25 A (at continuous power, 4 W) Average current drawn ......... 7.9 A (4 W for four channels) 10.5 A (4 W for two channels) 10.7 A (2 W for four channels) Fuse 40 A × 1 Dimensions (W × H × D) ... 245 × 56 × 200 mm (9-5/8 × 2-1/4 × 7-7/8 in.) Weight 2.2 kg (4.9 lbs) (Leads for wiring not included) Maximum power output ....... 150 W × 4 (4 W) / 400 W × 2 (4 W) Continuous power output ... 75 W × 4 (at 14.4 V, 4 W, 20 Hz to 20 kHz, ≦ 1% THD) 200 W × 2 (at 14.4 V, 4 W BRIDGE, 1 kHz, ≦ 1% THD) 100 W × 4 (at 14.4 V, 2 W, 1 kHz, ≦ 1% THD) Load impedance 4 W (2 W to 8 W allowable) (Bridge connection: 4 W to 8 W allowable) Frequency response 10 Hz to 35 kHz (+0 dB, -3 dB) Signal-to-noise ratio 95 dB (IHF-A network) Distortion 0.06 % (10 W, 1 kHz) Separation 67 dB (1 kHz) 60 dB (100 Hz to 10 kHz) Low pass filter: Cut off frequency 40 Hz to 500 Hz Cut off slope 12 dB/oct High pass filter: Cut off frequency 40 Hz to 500 Hz Cut off slope 12 dB/oct Gain control: RCA 200 mV to 6.5 V Speaker 0.8 V to 10 V Maximum input level / impedance: RCA 6.5 V / 22 kW Speaker 10 V / 22 kW CEA2006 Specifications Power output 75 W RMS × 4 Channels (at 14.4 V, 4 W and ≦ 1 % THD +N) 200 W RMS × 2 Channels (at 14.4 V, 4 W BRIDGE and ≦ 1 % THD+N) 100 W RMS × 4 Channels (at 14.4 V, 2 W and ≦ 1 % THD+N) S/N ratio 77 dBA (reference: 1 W into 4 W) Notes ! Specifications and the design are subject to modifications without notice. ! The average current drawn is nearly the maxi- mum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 14 En