Pioneer GM-D9500F Owner's Manual - Page 12
Connecting the speaker, output terminals, Connecting the units, 8 in. and twist.
UPC - 012562967608
View all Pioneer GM-D9500F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Section 03 Connecting the units 1 System remote control terminal 2 GND terminal 3 Power terminal 4 Terminal screws 5 Battery wire 6 Ground wire 7 System remote control wire 1 Lug 2 Speaker wire 3 Connect the speaker wires to the speaker output terminals. Fix the speaker wires securely with the terminal screws. Connecting the speaker output terminals 1 Expose the end of the speaker wires using nippers or a cutter by about 10 mm (3/8 in.) and twist. Twist 1 Terminal screws 2 Speaker wires 3 Speaker output terminals 2 Attach lugs to speaker wire ends. Lugs not supplied. Use pliers, etc., to crimp lugs to wires. 12 En
1
System remote control terminal
2
GND terminal
3
Power terminal
4
Terminal screws
5
Battery wire
6
Ground wire
7
System remote control wire
Connecting the speaker
output terminals
1
Expose the end of the speaker wires
using nippers or a cutter by about 10 mm
(3/8 in.) and twist.
Twist
2
Attach lugs to speaker wire ends. Lugs
not supplied.
Use pliers, etc., to crimp lugs to wires.
1
Lug
2
Speaker wire
3
Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
1
Terminal screws
2
Speaker wires
3
Speaker output terminals
Connecting the units
En
12
Section
03