Pioneer P4400 Owner's Manual - Page 42
Subwoofer Setting Adjustment 80Hz, Front Image Enhancer Function FIE
View all Pioneer P4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Audio Adjustment Subwoofer Setting Adjustment (80Hz) When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level of Subwoofer. 1. Press the AUDIO button and select the Subwoofer setting mode (80Hz) in the Audio Menu. 2. Select the frequency to 50 Hz, 80 Hz or 125 Hz with the 2/3 EQUALIZER CURVE TRK A SUB-W buttons. 3. Increase or decrease the output level with the 5/∞ buttons. EQUALIZER CURVE TRK A SUB-W The display shows "+6" - "-6". Note: • You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the Subwoofer ON/OFF mode. Front Image Enhancer Function (FIE) The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. Precaution: • When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume. 1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu. 2. Switch the F.I.E. function ON/OFF with the 5/∞ buttons. "FIE" Note: • After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced. • Switch the F.I.E. function OFF when using a 2-speaker system. 41