Pioneer P8DVD Owner's Manual - Page 63

Initial Settings Section 12 Initial Settings Adjusting initial settings 1 Touch A.MENU and INITIAL and then touch DT. WARNING. 2 Touch a to turn warning tone on. # To turn warning tone off, touch b. 1 Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function names. 1 Press AV SOURCE and hold until the unit turns off. 2 Touch A.MENU and then touch INITIAL to display the function names. The function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Switching the warning tone If the front panel is not detached from this unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone. ! Only when using this unit with ADD-ON mode (M), you can operate this function. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. ! Only when using this unit with ADD-ON mode (M), you can operate this function. 1 Touch A.MENU and INITIAL and then touch AUX. 2 Touch a to turn auxiliary setting on. # To turn auxiliary setting off, touch b. Switching the automatic disc playback You can turn automatic disc playback on or off when you insert a disc into the disc loading slot. When this function is on, the disc will be automatically played after it is inserted into the disc loading slot. Initially, this function is set to on. 1 Touch A.MENU and INITIAL and then touch DVD D. AUTO. 2 Touch a to turn automatic disc playback on. # To turn automatic disc playback off, touch b. En 63