Pioneer P8DVD Owner's Manual - Page 64
Switching the wired, remote control setting, Selecting remote control, code type, Initial Settings
![]() |
UPC - 012562693187
View all Pioneer P8DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Section 12 Initial Settings Switching the wired remote control setting When using this unit with a Pioneer head unit featuring jack for the wired remote control, you can operate the basic function of each source by touch panel key. ! Only when using this unit with IP-BUS mode (S), you can operate this function. 1 Touch A.MENU and INITIAL and then touch WIRED RMT. 2 Touch a to turn wired remote control on. # To turn wired remote control off, touch b. 2 Touch a or b to select the remote control code type. Touch a to select CODE A. Touch b to select CODE B. Selecting remote control code type When using this unit with a Pioneer DVD player, changing the remote control code type enables you to operate this unit only. Select the appropriate remote code according to the combined components. ! Only when using this unit with IP-BUS mode (S), you can operate this function. ! Select CODE A when combined with a DVD navigation unit. ! Select CODE B when combined with a multi-DVD player. Important When changing the remote control code type, switch the remote control selection switch on the left side of the remote control to the appropriate position. (Refer to page 62.) 1 Touch A.MENU and INITIAL and then touch REM CODE. 64 En
![](/manual_guide/products/pioneer-p8dvd-owners-manual-825f720/64.png)