Pioneer P8DVD Owner's Manual - Page 65

Other Functions Section 13 Other Functions Introduction of setup adjustments 1 1 Setup menu display Shows the setup function names. % Touch A.MENU and then touch SETUP to display the setup function names. The setup function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Note If you do not operate the setup function within about 30 seconds, the display is automatically returned to the source display. 1 Touch A.MENU and SETUP and then touch AV INPUT1. 2 Touch c or d to select the video input 1 setting. Touch c or d until the desired setting appears in the display. ! OFF  No video component is connected ! VIDEO  External video component ! DVD  Pioneer DVD head unit (e.g., DVH- P5000MP) # Only when using this unit with IP-BUS mode (S), you can select DVD. Setting the video input 2 You can switch the setting according to the connected component. ! Select VIDEO to watch video of a con- nected component as AV-2 source. ! Select B. CAMERA when a rear view cam- era is installed on your vehicle. 1 Touch A.MENU and SETUP and then touch AV INPUT2. 2 Touch c or d to select the video input 2 setting. Touch c or d until the desired setting appears in the display. ! OFF  No video component is connected ! VIDEO  External video component ! B. CAMERA  Rear view camera Setting the video input 1 You can switch the setting according to the connected component. ! Select VIDEO to watch video of a con- nected component as AV-1 source. ! Select DVD to watch video of a connected Pioneer DVD head unit. Setting for rear view camera CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. En 65