Pioneer PDP-4271HD Owner's Manual - Page 78

Enjoying through USB interface Home, Gallery function

Page 78 highlights

12 Enjoying through External Equipment Enjoying through USB interface (Home Gallery function) On this system, you can watch JPEG images that have been captured and stored in memory cards using a digital still camera. You can also connect your digital camera directly to the Plasma Display using a USB connector cable. Digital still USB connector cable camera USB memory Multi-card reader Image data display Connecting a USB device Hold the USB device's connector with its top side facing the front panel, and then insert it into the USB port on the side of the Plasma Display. • Insert the USB device's connector as far as it goes. • When using the USB connector of your device, connect it directly to the USB port. Side of the Plasma Display NOTE • A single USB device can only be connected at a time. No USB hub can be connected. • Such devices as a printer or keyboard cannot be connected and used. USB memory or multi-card reader Readable memory cards This system can read memory cards whose formats are FAT12, FAT16, FAT32, or VFAT. Readable data files This system can read only JPEG files that meet the following conditions: • Extensions are JPG or JPEG. • JPEG 4:2:2 and 4:2:0 format • The image resolution must be less than 3264 pixels in the horizontal direction and 2448 pixels in the vertical direction. • The image resolution must be higher than 160 pixels in the horizontal direction and 120 pixels in the vertical direction. NOTE • This system may not be able to display images, depending on the type of your memory card. • This system may not be able to display images modified or edited using a personal computer or other equipment. • This system complies with the USB Mass Storage Class. Removing a USB device To remove a USB device's connector, quit the Home Gallery screen and then remove it. NOTE • For details on connectable devices, see Pioneer's website: http://www.pioneerelectronics.com • Be sure to quit the Home Gallery screen before removing the USB device. If you remove the USB device while the Home Gallery screen is displayed, data inside the memory may be damaged. • Do not insert or remove the USB device immediately after the system is switched on or off. This may cause data inside the memory to be damaged. • Do not turn the digital camera off while the Home Gallery screen is displayed. 78 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292

78
En
Enjoying through External Equipment
12
Enjoying through USB interface (Home
Gallery function)
On this system, you can watch JPEG images that have been
captured and stored in memory cards using a digital still
camera. You can also connect your digital camera directly to
the Plasma Display using a USB connector cable.
NOTE
A single USB device can only be connected at a time. No
USB hub can be connected.
Such devices as a printer or keyboard cannot be connected
and used.
Readable memory cards
This system can read memory cards whose formats are FAT12,
FAT16, FAT32, or VFAT.
Readable data files
This system can read only JPEG files that meet the following
conditions:
• Extensions are JPG or JPEG.
JPEG 4:2:2 and 4:2:0 format
The image resolution must be less than 3264 pixels in the
horizontal direction and 2448 pixels in the vertical direction.
The image resolution must be higher than 160 pixels in the
horizontal direction and 120 pixels in the vertical direction.
NOTE
This system may not be able to display images, depending on
the type of your memory card.
This system may not be able to display images modified or
edited using a personal computer or other equipment.
This system complies with the USB Mass Storage Class.
Connecting a USB device
Hold the USB device’s connector with its top side facing
the front panel, and then insert it into the USB port on the
side of the Plasma Display.
Insert the USB device’s connector as far as it goes.
When using the USB connector of your device, connect
it directly to the USB port.
Removing a USB device
To remove a USB device’s connector, quit the Home Gallery
screen and then remove it.
NOTE
For details on connectable devices, see Pioneer’s website:
Be sure to quit the Home Gallery screen before removing the
USB device. If you remove the USB device while the Home
Gallery screen is displayed, data inside the memory may be
damaged.
Do not insert or remove the USB device immediately after the
system is switched on or off. This may cause data inside the
memory to be damaged.
Do not turn the digital camera off while the Home Gallery
screen is displayed.
Digital still
camera
Multi-card reader
Image data display
USB connector cable
USB memory
Side of the Plasma Display
USB memory or
multi-card reader