Pioneer PDP-427CMX User Manual - Page 17
Connection panel PDP-427CMX
View all Pioneer PDP-427CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English Connection panel (PDP-427CMX) The connection panel is provided with two video input terminals and one video output terminal. Audio input/ output and speaker output terminals are also provided. For instructions regarding connections, consult the pages noted in parentheses by each item. Part Names and Functions 90 -= Part Names and Functions IN OUT COMBINATION RS-232C 1 2 1 COMBINATION IN/OUT Never connect any component to these connectors without first consulting your Pioneer installation technician. These connectors are used for Plasma Display setup adjustments. 2 RS-232C Never connect any component to this connector without first consulting your Pioneer installation technician. This connector is used for Plasma Display setup adjustments. 3 AUDIO (OUTPUT) (Stereo mini jack) Use to output the audio of the selected source component connected to this unit to an AV amplifier or similar component. Note: No sound is produced from the AUDIO (OUTPUT) jack when the MAIN POWER switch is set to OFF or ON (standby) (page 15). 4 AUDIO (INPUT1) (Stereo mini jack) Use to obtain sound when INPUT1 is selected. Connect the audio output jack of components connected to INPUT1 to this unit (page 15). 5 AUDIO (INPUT2) (Stereo mini jack) Use to obtain sound when INPUT2 is selected. Connect the audio output jack of components connected to INPUT2 to this unit (page 15). OUTPUT INPUT1 INPUT2 AUDIO AUDIO AUDIO ANALOG RGB OUT (D-Sub) INPUT1 ANALOG RGB IN (D-Sub) INPUT2 DIGITAL RGB (DVI-D) 345 6 7 8 6 ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin) Use the ANALOG RGB OUT (INPUT1) terminal to output the video signal to an external monitor or other component. Note: The video signal will not be output from the ANALOG RGB OUT (INPUT1) terminal when the main power of this unit is off or in standby mode (page 14). 7 ANALOG RGB IN (INPUT1) (mini D-sub 15 pin) For connection of a personal computer (PC) or similar component. Make sure that the connection made corresponds to the format of the signal output from the connected component (page 14). 8 DIGITAL RGB (INPUT2) (DVI-D jack) Use to connect a computer. Note: This unit does not support the display of copyguard-protected video signals (page 14). 9 SPEAKER (R) terminal For connection of an external right speaker. Connect a speaker that has an impedance of 6 Ω to 16 Ω (page 15). 0 SPEAKER (L) terminal For connection of an external left speaker. Connect a speaker that has an impedance of 6 Ω to 16 Ω (page 15). - AC IN Use to connect the supplied power cord to an AC outlet (page 16). = MAIN POWER switch Use to switch the main power of the unit on and off. 11 En