Pioneer PDP-433CMX Operating Instructions - Page 16
Installation and Connections - stand
View all Pioneer PDP-433CMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Installation and Connections Installation of the Unit Installation using the supplied display stand Be sure to fix the supplied stand to the installation surface. Use commercially available M8 bolts that are 25 mm longer than the thickness of the installation surface. 1 Fix the supplied stand to the installation surface at each of the 4 prepared holes using commercially available M8 bolts . 3 Fix this unit using the supplied washer and bolt. Front Use a 6 mm hex wrench to bolt them. PDP-503CMX: 798 mm (31-7/16 in.) PDP-433CMX: 768 mm (30-1/4 in.) Rear 110 mm (4-5/16 in.) 2 Set this unit in the stand. CAUTION This display unit weighs at least 67 lbs (30 kg) and has little frontto-back depth, making it very unstable when stood on edge. As a result, two or more persons should cooperate when unpacking, moving, or installing the display. Installation and Connections 10 En