Pioneer PDP-6070HD Owner's Manual - Page 32

06 Basic Operations Basic Operations Turning on the power (from standby mode) 1 Press a POWER on the Plasma Display if the POWER ON and STANDBY indicators are off. • The STANDBY indicator on the Plasma Display lights up red. 2 Confirm that the STANDBY indicator lights up red, and then press TV a on the remote control unit or STANDBY/ ON on the Plasma Display to turn the system on. • The POWER ON indicator on the Plasma Display lights up blue. Plasma Display (PDP-6072HD/PDP-6071HD/PDP-6070HD) POWER button POWER ON indicator STANDBY indicator POWER ON STANDBY REC TIMER REC TIMER indicator Turning off the power (to standby mode) 1 Press TV a on the remote control unit or STANDBY/ON on the Plasma Display. • The system enters the standby mode and the image on the screen disappears. • The STANDBY indicator lights up red. • This will allow the system to automatically receive digital TV program information while in the standby mode. NOTE • If you are not going to use this system for a long period of time, remove the power cord from the power outlet. Plasma Display status indicators The table below shows the operational status of the Plasma Display System. You can check the current status of the system with the indicators on the Plasma Display. Indicator Status System Status POWER ON STANDBY The power cord of the Plasma Display has been disconnected or the POWER button on the Plasma Display is off. Power to the system is on. The system is in the standby mode. (PDP-5072HD/PDP-5071HD/PDP-5070HD) POWER button POWER ON STANDBY POWER ON indicator STANDBY indicator (PDP-4272HD/PDP-4271HD/PDP-4270HD) ON STANDBY REC TIMER POWER ON indicator STANDBY indicator For other than the above, see "Troubleshooting"on page 91. CAUTION • While the POWER ON and STANDBY indicators are off, the system cannot be placed into the power-on mode even when TV a or STANDBY/ON button is pressed. Make sure to press POWER and see if the standby indicator lights up red. • The Plasma Display System will still consume some power as long as the power cord is inserted into the power outlet. Viewed from below of the display (left). STANDBY/ON button POWER button (Right side view) 32 En