Pioneer SC-75 Owner's Manual - Page 127

14 Additional information Specifications Amplifier section Continuous average power output* 8 W...135 W** per channel 6 W...175 W*** per channel * Measured pursuant to the Federal Trade Commission's Trade Regulation rule on Power Output Claims for Amplifiers ** 1 kHz with no more than 0.08 %**** total harmonic distortion *** 1 kHz with no more than 1 %**** total harmonic distortion **** Measured by Audio Spectrum Analyzer Multi channel simultaneous power output (1 kHz, 1 %, 8 W) 9 ch total...760 W Continuous Power Output (1 kHz, 8 W, 0.08 %) Front...135 W + 135 W Center...135 W Surround...135 W + 135 W Surround back...135 W + 135 W Continuous Power Output (1 kHz, 6 W, 1.0 %) Front...175 W + 175 W Center...175 W Surround...175 W + 175 W Surround back...175 W + 175 W Front height/Front wide...175 W + 175 W Continuous Power Output (1 kHz, 4 W, 1.0 %) Front...220 W + 220 W Center...220 W Surround...220 W + 220 W Surround back...220 W + 220 W Front height/Front wide...220 W + 220 W Total harmonic distortion 0.04 % (1 kHz, 110 W + 110 W, 8 W) Guaranteed speaker impedance...4 W to 16 W Audio Section Input (Sensitivity/Impedance) LINE...390 mV/47 kW Output (Level/Impedance) REC...390 mV/2.2 kW Signal-to-Noise Ratio (IHF, short circuited, A network) LINE...101 dB Tuner Section Frequency Range (FM)...87.5 MHz to 108 MHz Antenna Input (FM)...75 W unbalanced Frequency Range (AM)...530 kHz to 1 700 kHz Antenna (AM)...Loop antenna (balanced) Video Section Signal level Composite Video...1 Vp-p (75 W) Component Video Y: 1.0 Vp-p (75 W), PB/PR: 0.7 Vp-p (75 W) Corresponding maximum resolution Component Video...1080p (1125p) Digital In/Out Section HDMI terminal...19-pin (Not DVI) HDMI output type...5 V, 55 mA HDMI input/MHL terminal...5 V, 900 mA USB terminal...USB2.0 High Speed (Type A) 5 V, 2.1 A iPod terminal...USB, and Video (Composite) ADAPTER PORT terminal...5 V, 100 mA WIRELESS LAN ADAPTER terminal...5 V, 600 mA Integrated Control Section Control (IR) terminal...ø 3.5 Mini-jack (MONO) IR signal...High Active (High Level: 2.0 V) 12 V Trigger terminal...ø 3.5 Mini-jack (MONO) 12 V Trigger output type...12 V, Total 150 mA RS-232C cable type...9-pin, cross type, female-female Network Section LAN terminal...10 BASE-T/100 BASE-TX Miscellaneous Power requirements...AC 120 V, 60 Hz Power consumption...330 W In standby...0.1 W Dimensions...435 mm (W) x 185 mm (H) x 441 mm (D) (17.13 in. (W) x 7.28 in. (H) x 17.36 in. (D)) Weight (without package)...15.0 kg (33.1 lbs) Number of Furnished Parts MCACC Setup microphone...1 Remote control unit...1 AAA size IEC R03 dry cell batteries...2 AM loop antenna...1 FM wire antenna...1 Power cord CD-ROM (AVNavigator) Quick start guide Safety Brochure Warranty sheet Notes ! Specifications and the design are subject to possible modifications without notice, due to improvements. ! This product includes FontAvenue® fonts licensed by NEC Corporation. FontAvenue is a registered trademark of NEC Corporation. ! iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. ! Microsoft, Windows, Windows Media and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ! Corporation and product names mentioned herein are trademarks or registered trademarks of the respective corporations. 127