Pioneer SC-75 Owner's Manual - Page 38

Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.

Page 38 highlights

03 Connecting your equipment MULTI-ZONE setup This receiver can power up to four independent systems in separate rooms after you have made the proper MULTI-ZONE connections. Different sources can be playing in four zones at the same time or, depending on your needs, the same source can also be used. The main and sub zones have independent power (the main zone power can be off while one (or both) of the sub zones is on) and the sub zones can be controlled by the remote or front panel controls. Making MULTI-ZONE connections It is possible to make these connections if you have a separate TV, subwoofer and speakers for your primary (ZONE 2) sub zone, and a separate amplifier (and speakers) for your secondary (ZONE 3) sub zone. You will also need a separate amplifier if you are not using the speaker terminals for your primary sub zone (For detail, see MULTI-ZONE setup using speaker terminals (ZONE 2) on page 39). Also, if the separate receiver in the sub zone has an HDMI input terminal, this unit's HDMI input can be played as HDZONE. Here are three primary sub zone setups possible with this system. Choose whichever works best for you. Important ! The settings must be change at ZONE Setup in order to use the HDZONE function (page 104). MULTI-ZONE listening options The following table shows the signals that can be output to ZONE 2, ZONE 3 and HDZONE: Sub Zone ZONE 2 ZONE 3 HDZONE (HDMI) Input functions available DVD, SAT/CBL, DVR/BDR, VIDEO, INTERNET RADIO, PANDORA, MEDIA SERVER, FAVORITES, iPod/USB, TV, CD, TUNER, ADAPTER PORT (Outputs analog audio, composite video and component video.) DVD, SAT/CBL, DVR/BDR, VIDEO, TV, CD, TUNER, ADAPTER PORT (Outputs analog audio) BD, DVD, SAT/CBL, DVR/BDR, VIDEO, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5/ MHL, HDMI 6, HDMI 7, HDMI 8 (Outputs HDMI audio and video signals) a ! It is not possible to down-convert the audio and video input signals from the HDMI input terminals, digital input terminals (OPTICAL and COAXIAL) and the COMPONENT VIDEO input terminals and output them to ZONE 2. ! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL and COAXIAL) and output them to ZONE 3. ! When any of the INTERNET RADIO, PANDORA, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT inputs is selected in the main zone, it is only possible to select the same input as in the main zone for the sub zone. (Inputs other than the ones listed here can be selected.) The same limitations apply when one of the above inputs is selected for the sub zone. b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 8 are assigned. Upon shipment from the factory, the input terminals are assigned to DVD, SAT/CBL, DVR/BDR, VIDEO, HDMI 5/MHL, HDMI 6, HDMI 7 and HDMI 8, in order starting from terminal HDMI IN 1. ! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COMPONENT VIDEO input terminals cannot be up-converted and output to the HDZONE. ! When any of the HDMI 4, HDMI 6, HDMI 7 or HDMI 8 inputs is selected in the main zone, it is only possible to select the same input as in the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.) The same limitations apply when one of the above inputs is selected for the HDZONE. Basic MULTI-ZONE setup (ZONE 2) 1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver. You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration. 2 Connect a subwoofer to the SUBWOOFER ZONE 2 OUT jack on this receiver. When a subwoofer is connected, we recommend setting HPF (High Pass Filter) at ZONE Setup to ON (page 104). 3 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver. ! COMPONENT VIDEO ZONE 2 OUT can be used to output clear images. ! The GUI screen is not displayed if only the COMPONENT VIDEO ZONE 2 OUT jack is connected. Sub zone (ZONE 2) 3 VIDEO IN Main zone ZONE 2 OUT LINE LEVEL INPUT AUDIO IN RL 2 1 ZONE 2 SUBWOOFER ZONE 2 OUT ZONE 2 SUBWOOFER 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131

38
03
Connecting your equipment
MULTI-ZONE setup
This receiver can power up to four independent systems in separate rooms after you have made the proper
MULTI-ZONE connections.
Different sources can be playing in four zones at the same time or, depending on your needs, the same source
can also be used. The main and sub zones have independent power (the main zone power can be off while one (or
both) of the sub zones is on) and the sub zones can be controlled by the remote or front panel controls.
Making MULTI-ZONE connections
It is possible to make these connections if you have a separate TV, subwoofer and speakers for your primary
(
ZONE 2
) sub zone, and a separate amplifier (and speakers) for your secondary (
ZONE 3
) sub zone. You will also
need a separate amplifier if you are not using the speaker terminals for your primary sub zone (For detail, see
MULTI-ZONE setup using speaker terminals (ZONE 2)
on
page 39
).
Also, if the separate receiver in the sub zone has an HDMI input terminal, this unit’s HDMI input can be played as
HDZONE
.
Here are three primary sub zone setups possible with this system. Choose whichever works best for you.
Important
!
The settings must be change at
ZONE Setup
in order to use the
HDZONE
function (
page 104
).
MULTI-ZONE listening options
The following table shows the signals that can be output to
ZONE 2
,
ZONE 3
and
HDZONE
:
Sub Zone
Input functions available
ZONE 2
<a>
DVD
,
SAT/CBL
,
DVR/BDR
,
VIDEO
,
INTERNET RADIO
,
PANDORA
,
MEDIA SERVER
,
FAVORITES
,
iPod/USB
,
TV
,
CD
,
TUNER
,
ADAPTER PORT
(Outputs analog audio, composite video and component video.)
ZONE 3
<a>
DVD
,
SAT/CBL
,
DVR/BDR
,
VIDEO
,
TV
,
CD
,
TUNER
,
ADAPTER PORT
(Outputs analog audio)
HDZONE
(HDMI)
<b>
BD
,
DVD
,
SAT/CBL
,
DVR/BDR
,
VIDEO
,
HDMI 1
,
HDMI 2
,
HDMI 3
,
HDMI 4
,
HDMI 5
/
MHL
,
HDMI 6
,
HDMI 7
,
HDMI 8
(Outputs HDMI audio and video signals)
a
!
It is not possible to down-convert the audio and video input signals from the
HDMI
input terminals, digital input terminals
(
OPTICAL
and
COAXIAL
) and the
COMPONENT VIDEO
input terminals and output them to ZONE 2.
!
It is not possible to down-convert the audio input signal from the
HDMI
input terminals or digital input terminals (
OPTICAL
and
COAXIAL
) and output them to ZONE 3.
!
When any of the
INTERNET RADIO
,
PANDORA
,
MEDIA SERVER
,
FAVORITES
,
iPod/USB
or
ADAPTER PORT
inputs is
selected in the main zone, it is only possible to select the same input as in the main zone for the sub zone. (Inputs other than the
ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the sub zone.
b
!
The inputs that can be switched differ according to how terminals
HDMI
IN 1
to
IN 8
are assigned. Upon shipment from the
factory, the input terminals are assigned to
DVD
,
SAT/CBL
,
DVR/BDR
,
VIDEO
,
HDMI 5
/
MHL
,
HDMI 6
,
HDMI 7
and
HDMI 8
, in
order starting from terminal
HDMI
IN 1
.
!
The video/audio signals of the RCA analog input terminals, the digital input terminals (
OPTICAL
and
COAXIAL
) and the
COM-
PONENT VIDEO
input terminals cannot be up-converted and output to the
HDZONE
.
!
When any of the
HDMI 4
,
HDMI 6
,
HDMI 7
or
HDMI 8
inputs is selected in the main zone, it is only possible to select the
same input as in the main zone for the
HDZONE
. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the
HDZONE
.
Basic MULTI-ZONE setup (ZONE 2)
1
Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2
Connect a subwoofer to the SUBWOOFER ZONE 2 OUT jack on this receiver.
When a subwoofer is connected, we recommend setting
HPF
(High Pass Filter) at
ZONE Setup
to
ON
(
page 104
).
3
Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
!
COMPONENT VIDEO ZONE 2 OUT
can be used to output clear images.
!
The GUI screen is not displayed if only the
COMPONENT VIDEO ZONE 2 OUT
jack is connected.
ZONE 2
SUBWOOFER
ZONE 2
OUT
R
L
AUDIO IN
LINE LEVEL
INPUT
VIDEO IN
Sub zone (
ZONE 2
)
Main zone
3
2
1