Pioneer SC-79 Owner's Manual - Page 25
To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver.
View all Pioneer SC-79 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
03 Connecting your equipment Bi-wiring your speakers Your speakers can also be bi-wired if they support bi-amping. ! With these connections, the Speaker System setting makes no difference. CAUTION ! Don't connect different speakers from the same terminal in this way. ! When bi-wiring as well, heed the cautions for bi-amping shown above. % To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver. Using a banana plug for the second connection is recommended. Installing your speaker system At the very least, front left and right speakers only are necessary. Note that your main surround speakers should always be connected as a pair, but you can connect just one surround back speaker if you like (it must be connected to the left surround back terminal). [A] 9.2 channel surround system (Front height/Front wide) connection ! If necessary, select '9.1ch FH/FW' from the Speaker System menu. See Speaker system setting on page 101 to do this. ! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals. Front wide right Front height right Front height left Front wide left Front right Subwoofer 1 LINE LEVEL INPUT Center Subwoofer 2 LINE LEVEL INPUT Front left A FRONT R CENTER L SPEAKERS FRONT 1 SUBWOOFER 2 SURROUND SURR BACK F HEIGHT (Single) F WIDE L CENTER FRONT HEIGHT R L R PRE OUT FRONTWIDE / B R L SURROUND R L SURROUND BACK A R L (Single) Surround right 25 Surround back right Surround back left Surround left