Pioneer SC-79 Owner's Manual - Page 50

04 Basic Setup Operable settings/items Other functions INPUT SELECT (INPUT SELECTOR) VOLUME +/-, MUTE LISTENING MODE PQLS PHASE (Phase Control) PHASE (Full Band Phase Control) SOUND RETRIEVER AIR iPod iPhone iPad DIRECT CONTROL Descriptions Switches the input. Use to set the listening volume. Selects your favorite listening modes. Plays using the PQLS function. Plays with phase shifting in the low range corrected. The Full Band Phase Control feature calibrates the frequency-phase characteristics of the speakers connected. Switches the input to ADAPTER PORT and plays compressed sound with high sound quality. Switches the input to iPod/USB and sets the mode allowing operation from the iPod. 4 When you're finished, press RETURN. You will return to the Home Menu. Page 52 52 60 74 64 64 58 53 Changing the OSD display language (OSD Language) The language used on the Graphical User Interface screen can be changed. ! The explanations in these operating instructions are for when English is selected for the GUI screen. ! The on-screen display is only displayed when this receiver's HDMI OUT 1 or HDMI OUT 2 terminal is con- nected to the TV's HDMI input terminal by HDMI cable. When connected to the TV with anything other than an HDMI cable, watch the front panel display when performing operations and making settings. 1 Press u STANDBY/ON to switch on the receiver and your TV. Make sure that the TV's video input is set to this receiver (for example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is now selected). 2 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. 3 Select 'System Setup' from the Home Menu. 4 Select 'OSD Language' from the System Setup menu. 5 Select the desired language. 6 Select 'OK' to change the language. The setting is completed and the System Setup menu reappears automatically. About the Home Menu This receiver's Home Menu (HOME MENU) can be used to make various settings and to check and adjust items that have been set. ! The on-screen display is only displayed when this receiver's HDMI OUT 1 or HDMI OUT 2 terminal is con- nected to the TV's HDMI input terminal by HDMI cable. When connected to the TV with anything other than an HDMI cable, watch the front panel display when performing operations and making settings. % To display the Home Menu screen, press HOME MENU. on the remote control, then press HOME MENU A/V RECEIVER 1. Advanced MCACC 2. MCACC Data Check 3. Data Management 4. System Setup 5. Network Information 6. Operation Mode Setup Exit Return A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu. The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust as necessary. ! Advanced MCACC - Use this to make automatic settings and detailed manual settings for the surround sound. For details, see Making receiver settings from the Advanced MCACC menu on page 93. ! MCACC Data Check - This displays the Advanced MCACC measurement results. Use it to check the MCACC memory. For details, see Checking MCACC Data on page 98. ! Data Management - Use this to manage the data in the MCACC memory. For details, see Data Management on page 99. ! System Setup - Use this to make various settings related to this system. For details, see Making receiver set- tings from the System Setup menu on page 101. ! Network Information - The setting status of the network-related items can be checked. For detail, see Checking the Network Information on page 105. ! Operation Mode Setup - Use this to select this receiver's operation mode. For details, see Operation Mode Setup on page 49. 50