Pioneer SX-10AE Instruction Manual English - Page 19
> Before Start, > Part Names, > Install, > Playback
View all Pioneer SX-10AE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
> Before Start > Part Names > Install > Playback Setup | Others "4 ohm": When any of the connected speakers have 4 ≠ or more to less than 6 ≠ impedance, or when speaker systems are connected to both of the SPEAKERS A/B terminals "6 ohm (default value)": When the connected speakers all have 6 ≠ or more impedance 0 Note that when connecting to both SPEAKERS A and B terminals, connect speakers with 8 ≠ to 16 ≠ impedance to both A and B. 0 For impedance, check the indications on the back of the speakers or their instruction manual. Tuner Setting The setting cannot be selected when input other than "AM" or "FM" is selected. Preset Write You can register up to 40 of your favorite radio stations. While the preset number is flashing (about 8 seconds), repeatedly press the cursor Left/Right buttons on the remote controller to select a number between 1 and 40. Preset Erase Delete a registered preset number. 0 This setting is not available if you have not selected a preset number. Name Edit Set simple names for the stations you have preset. The set name will be shown on the main unit display. To name a preset radio station, after pressing AM or FM on the remote controller, select the preset number. For details on how to enter text, refer to "Naming Radio Stations Registered as Presets" (P16). 0 This setting is not available if you have not selected a preset number. AM Freq Step (European and Australian models) Select a frequency step depending on your area of residence. Select "9 kHz (default value)" or "10 kHz". 0 When this setting is changed, all radio presets are deleted. Tuning Mode Switches tuning to AM/FM automatic tuning/manual tuning. "Auto (default value)": Tuning Automatically. "Mono": Tuning Manually. Bluetooth Bluetooth AutoChange Reconnect Pairing Info Select whether or not to use the BLUETOOTH function. "On (default value)": Enables connection with a BLUETOOTH wireless technology enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings. "Off": When the BLUETOOTH function is not to be used The input of the unit will automatically be switched to "BLUETOOTH" when connection is made from a BLUETOOTH wireless technology enabled device to the unit. "On (default value)": The input will automatically become "BLUETOOTH" when a BLUETOOTH wireless technology enabled device is connected. "Off": The function is disabled. 0 If the input is not switched automatically, set to "Off" and change the input manually. This function automatically reconnects to the BLUETOOTH wireless technology enabled device connected last when you change the input to "BLUETOOTH". "On (default value)": When this function is to be used "Off": When this function is not to be used 0 This may not work with some BLUETOOTH wireless technology enabled devices. You can initialize the pairing information saved on this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. 0 This function does not initialize the pairing information on the BLUETOOTH wireless technology enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH wireless technology enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH wireless technology enabled device's instruction manual. En 19