Pioneer SX-10AE Instruction Manual English - Page 23
General Specifications - 2 0 ch
![]() |
View all Pioneer SX-10AE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
> Before Start > Part Names > Install > Playback General Specifications Amplifier (Audio) section Rated Output Power (FTC) (North American) 0 With 8 ohm loads, both channels driven, from 20 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. 0 With 6 ohm loads, both channels driven, at 1 kHz; rated 85 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. Rated Output Power (IEC) (European and Australian) 2 ch k 100 W at 6 ohms, 1 kHz, 1ch Driven of 1%THD MAXIMUM Effective Output Power (JEITA) 2 ch k 100 W at 6 ohms, 1 kHz, 2ch Driven of 10%THD Dynamic Power (*) (*)IEC60268-Short-term maximum output power 140 W (3 ≠) 120 W (4 ≠) 80 W (8 ≠) THD+N (Total Harmonic Distortion+Noise) 0.08% (20 - 20,000 Hz, half power) Input Sensitivity and Impedance 450 mV/40 k≠ (LINE (Unbalance)) Rated RCA Output Level and Impedance 420 mV/2.2 k≠ (LINE OUT) 2.8 V/3.3 k≠ (SUBWOOFER PRE OUT) Frequency Response 10 Hz - 100 kHz/i1 dB, j3 dB (DIRECT) Tone Control Characteristics n10 dB, 100 Hz (BASS) n10 dB, 10 kHz (TREBLE) 4 dB (P.BASS) Signal to Noise Ratio 100 dB (IHF-A, LINE IN, SP OUT) Speaker Impedance 4 ≠ - 16 ≠ Headphone Output Impedance 390 ≠ Headphone Rated Output 60 mW (32 ≠, 1 kHz, 10%THD) Tuner Section FM Tuning Frequency Range 87.5 MHz - 107.9 MHz (North American) 87.5 MHz - 108.0 MHz, RDS (European and Australian) AM Tuning Frequency Range 530 kHz - 1710 kHz (North American) 9 kHz Frequency Step (Default value): 522 kHz 1611 kHz (European and Australian) 10 kHz Frequency Step: 530 kHz - 1710 kHz (European and Australian) Preset Channel 40 BLUETOOTH Section Communication system BLUETOOTH Specification version 4.2 Frequency band 2.4 GHz band Modulation method FHSS (Frequency Hopping Spread Spectrum) Compatible BLUETOOTH profiles A2DP 1.3 AVRCP 1.5 Supported Codecs SBC AAC Transmission range (A2DP) 20 Hz - 20 kHz (Sampling frequency 44.1 kHz) Maximum communication range Line of sight approx. 32 ft. / 10 m (*) (*)The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. Setup | Others General Power Supply AC 120 V, 60 Hz (North American) AC 220-240 V, 50/60 Hz (European and Australian) Power Consumption 150 W (North American) 160 W (European and Australian) 0.4 W (Stand-by) 20 W (No-sound) Dimensions (W k H k D) 435 mm k 147 mm k 321 mm 17-1/8" k 5-13/16" k 12-5/8" Weight 6.7 kg / 14.8 lbs (North American) 7 kg / 15.4 lbs (European and Australian) Audio Inputs Analog CD, NETWORK, LINE1, LINE2 Audio Outputs Analog PRE OUT SUBWOOFER LINE OUT L/R Speaker Outputs SPEAKERS A: L/R SPEAKERS B: L/R Phones PHONES (Front, Ø1/4"/6.3 mm) En 23
![](/manual_guide/products/pioneer-sx10ae-instruction-manual-english-b59fce1/23.png)