Pioneer VSX-819H-K Owner's Manual - Page 23

English Deutsch Français Italiano Nederlands Español Connecting up 03 Bare wire connections A-Speaker terminals: 1 Twist exposed wire strands together. 2 Loosen terminal and insert exposed wire. 3 Tighten terminal. 1 2 3 Use the PRE OUT outputs to connect the surround back speakers Connect the PRE OUT outputs of the unit and additional amplifier to add a surround back speaker. Surround back channel amplifier Surround Back speakers SBL SBR 10 mm (3/8 in.) B-Speaker terminals: 1 Twist exposed wire strands together. 2 Push open the tabs and insert exposed wire. 3 Release the tabs. 1 2 3 10 mm (3/8 in.) Caution • These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts. • Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the back panel it may cause the power to cut off as a safety measure. ANALOG INPUT L R SURROUND AUDIO SPEAKERS A R BACK L (Single) PRE OUT FRONT R L ZONE2 OUT SUBWOOFER PRE OUT R L OUT DVR/VCR IN VIDEO SURRO R ANTENNA FM UNBAL 75 Ω MONITOR OUT BD/DVD IN TV/SAT IN PR PB Y OUT IN 2 (TV/SAT) SPEAKERS B R AM LOOP COMPONENT VIDEO IN 1 (BD/DVD) ASSIGNABLE 1-2 Class 2 Wiring L • You can use the additional amplifier on the surround back channel pre-outs for a single speaker as well. In this case plug the amplifier into the left (L (Single)) terminal only. 23 En