Pioneer VSX-935 7.2-Channel Network AV Receiver Instruction Manual English - Page 124
Power Management, Audio TV Out Default Value: Auto
View all Pioneer VSX-935 7.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Hardware Audio TV Out (Default Value: Auto) You can enjoy audio through the speakers of the TV while this unit is on. • The setting is fixed to "Auto" if "HDMI CEC" is set to "On". If you change this setting, set "HDMI CEC" to "Off". • Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV. • Depending on your TV or input signal of the connected device, audio may not be output from the TV even if this is set to "On". In such a case, audio is output from the speakers of the unit. • Audio is output from this unit if you operate the MASTER VOLUME dial on this unit when audio that is input to this unit is output from your TV speakers. If you do not want to output audio, change the setting of this unit or TV, or reduce the volume of this unit. On Off Auto When this function is used When this function is not used When the "HDMI Out" setting is "MAIN" or "MAIN+SUB" and the "HDMI CEC" setting is "On", the setting is fixed to "Auto". With "Auto", when audio is output from the TV speakers, audio is not output from the speakers of this unit, and when audio is output from the speakers of this unit, audio is not output from the TV speakers. • If the HDMI CEC setting is off on the TV, there may be audio output from both the TV speakers and the speakers of this unit. Audio Return Channel (eARC supported) (Default Value: On) You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARCcompatible TV through the speakers connected to the unit. On When enjoying the TV sound through the speakers connected to the unit Off When the ARC function or eARC function is not used Setup Auto Delay (Default Value: On) Automatically corrects desynchronization between the video and audio signals based on the information from the HDMI Lip-Sync-compatible TV. On When enabling the automatic correction function Off When not using the automatic correction function Power Management Change the settings for the power-save function. Sleep Timer (Default Value: Off) 30 minutes, 60 minutes, 90 minutes Off You can allow the unit to enter standby automatically when the specified time elapsed. Select a value from "30 minutes", "60 minutes" and "90 minutes". Does not turn the unit to standby automatically. Auto Standby (Default Value: On) This setting allows the unit to enter standby mode automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is enabled, the unit enters the HYBRID STANDBY mode which minimizes the increase in power consumption.) On The unit will automatically enter standby mode ("AUTO STBY" will light). • "Auto Standby" is displayed on the main unit's display and TV screen 30 seconds before entering standby mode. • "Auto Standby" does not work when Zone 2 is active. Off The unit will not automatically enter standby mode. 124