Plantronics 510 USB User Guide - Page 4

POWERING Powering Headset PAIRING Pairing Headset with Bluetooth Phone Press and hold the power/mute button for three seconds to turn the headset on or off. The indicator light flashes blue when the headset is on. The indicator light will flash red when the battery becomes low. Powering USB Bluetooth Adapter The USB Bluetooth adapter is automatically powered on upon inserting into the USB port of the computer. If your USB port on the computer is hard to access, you can use the USB extension cable. NOTE: The USB Bluetooth adapter is automatically active with the current paired headset upon powering on. Before using your headset for the first time, you must pair it with your Bluetooth phone or device. Be sure the headset is fully charged. For set up and pairing instructions with Bluetooth devices other than mobile phones, please consult your Bluetooth device user guide. Turn on both devices. 1. Simultaneously press the listen volume adjust button marked + (volume up) and the call control button. Release the buttons when the indicator light begins to flash red then blue. 2. While the headset is flashing red and blue, use the phone menu to search for Bluetooth devices and select "510 Plantronics". 3. When prompted for passkey enter 0000. The headset will flash blue when paired successfully. 6 7