Polaroid Pogo Printer Bundle Pink Polaroid Z2300 Instant Digital Camera Manual - Page 37

White Balance This sets the white balance for a variety of lighting conditions and adjusts the images overall color according to the surrounding light conditions. Use this function if image color appears unnatural. * Auto / Incand. / Fluoresc.1 / Fluoresc.2 / Daylight / Cloudy / Manual WB Sharpness This sets the sharpness of the image that will be captured. * Hard / Standard / Soft Color This sets the overall color of the image that will be captured. * Standard / Vivid / Color Accent (Red) / Color Accent (Green) / Color Accent (Blue) / Sepia / B&W / Blue / Red / Green / Yellow / Purple Saturation This sets the saturation of the image that will be captured. * High / Standard / Low Metering This sets the metering method for calculating the exposure. * Center: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. * Spot: A very small portion of the center of the screen is measured to calculate the correct exposure. * Average: The exposure is measured all of the image area. Capture Mode This sets the recording method at the time of capturing images. * Single: Captures one image at a time. * Continuous: Permits continuous capture of up to 3 images. * AEB: Permits 3 consecutive images in the order of standard exposure, underexposure and overexposure compensation. * Album Shot: Creates an album-like layout to combine 3 shots into a single image. * Burst Permits continuous photography while pressing and holding the shutter button. As long as you hold the shutter button pressed, images are captured until the memory capacity is exhausted. * Cont.flash Permits continuous capture of up to 3 images with flash. * Pre-shot Lets you capture the background first, then have someone to capture you in front of it. * Coupl.shot Uses separate areas to combine two shots. You can include yourself in the shot. EN-37