ProForm 12.0tt Treadmill English Manual - Page 29
Clear WiFi Setting, IP Address
View all ProForm 12.0tt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Press the Enter button to check for firmware updates using your wireless network. If an update is available, the update will begin automatically. IMPORTANT: To avoid damaging the treadmill, do not turn off the power while the firmware is being updated. The update may take several minutes. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. Default Settings-To restore the console to its factory default settings, press the Enter button. Note: The console will erase any information that you have saved in its memory. IP Address-Displays the console's IP Address. The WiFi-Normal option will allow you to set up a wireless network connection using the console. See step 4 for instructions. 4. Use WiFi-Normal to set up a wireless connection. This option will allow you to set up a wireless network connection using the console. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. To set up a wireless network connection using the console, first press the Enter button. Next, set the included WiFi setup card on the console. The buttons on the WiFi setup card are referenced in the following instructions. Card The WiFi-Advanced option will allow you to set up a wireless network connection using your computer, smart phone, tablet, or other Wi-Fi device. See step 5 on page 30 for instructions. Connect to iFit Account-To set up a different iFit account, but maintain the existing wireless connection, follow the instructions in the matrix. Note: This option will rarely be used. Clear WiFi Setting-To erase the console's wireless network settings and have it forget the currently selected wireless network, follow the instructions in the matrix. Contrast-To adjust the contrast level of the display, press the Incline increase and decrease buttons. A list of networks will appear in the matrix. Press the up and down buttons to highlight the desired network. Then, press the Enter button. Note: Do not select IFIT_SETUP. Note: The time display will show the number of the currently-selected access point. The distance display will show the total number of access points detected. If the network has a password, enter the password. A keyboard will appear in the matrix. As necessary, press the buttons on the WiFi setup card to select the caps option, the number option, or the symbol option. 29