ProForm 295 Cse Instruction Manual - Page 13

16. Identify the Right Pedal (13) and the Right Pedal Arm (14). 16 Attach the Right Pedal (13) to the Right Pedal Arm (14) with two #10 x 51mm Screws (108), two #10 x 13mm Screws (104), and four #10 Washers (102); start all the Screws, and then tighten them. Attach the Left Pedal (not shown) to the Left Pedal Arm (not shown) in the same way. 17. Apply a small amount of grease to one of the Pedal Arm Axles (32). 17 Tighten an M8 x 23mm Shoulder Screw (115) with an M8 Washer (88) and a Pedal Arm Cover (31) a few turns into the Pedal Arm Axle (32). While a second person holds the front end of the Right Pedal Arm (14) inside the bracket on the Right Upper Body Leg (11), insert the Pedal Arm Axle (32) into both parts. Next, tighten an M8 x 23mm Shoulder Screw (115) with an M8 Washer (88) and a Pedal Arm Cover (31) a few turns into the Pedal Arm Axle (32). Tighten both Shoulder Screws at the same time; to avoid damaging the Pedal Arm Covers, do not overtighten the Shoulder Screws. Repeat this step to attach the Left Pedal Arm (not shown) to the Left Upper Body Leg (12). 13 14 102 102 104 108 104 12 115 88 31 11 31 88 115 14 32 Grease 13