ProForm 325 Csx Bike English Manual - Page 10

8. Orient the Backrest (11) as shown. 8 Attach the Backrest (11) to the Backrest Frame (8) with two M6 x 40mm Screws (27). 11 27 8 9. Remove the Accessory Tray (5) from the Left and Right Front Shields (57, 58). Set the 9 Accessory Tray aside. Tip: It may be necessary to use a standard screwdriver to release the tabs on the Accessory Tray. Have a second person hold the Upright (4) near the Frame (1). Locate the wire tie inside the Upright (4). Tie the lower end of the wire tie to the Main Wire (77). Then, pull the other end of the wire tie upward until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (77) from falling into the Upright (4), secure it to the Upright with the wire tie. Wire Tie 5 57, 58 4 Wire Tie 1 77 10