ProForm 480 Spacesaver Elliptical Uk Manual - Page 12
Arm Axle 55. Tighten an M10 x 20mm Patch
View all ProForm 480 Spacesaver Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
13. Apply a generous amount of grease to a Pedal Arm Axle (55). Tighten an M10 x 20mm Patch 13 Screw (68) and an M10 Washer (95) into one end of the Pedal Arm Axle. Insert the Pedal Arm Axle (55) into the Right Upper Body Leg (72) as shown. Repeat this step on the other side of the elliptical exerciser. Grease 68 95 55 72 14. Apply a small amount of grease to a Large Wave Washer (89). Slide the Large Wave 14 Washer onto the right side of the Pedal Arm Axle (55) in the Right Upper Body Leg (72). Slide the right Pedal Arm (32) onto the right side of the Pedal Arm Axle (55) in the Right Upper Body Leg (72). Attach the right Pedal Arm (32) with an M10 x 20mm Patch Screw (68) and an M10 Washer (95). Press an Axle Cover (66) onto each end of the Pedal Arm Axle (55). Repeat this step on the other side of the elliptical exerciser. 72 66 55 Grease 89 95 68 66 32 12