ProForm 575 Crosstrainer Treadmill English Manual - Page 20

THE INFORMATION MODE The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode. When the information mode is selected, you can also choose an audio setting for your cross training workouts. To exit the information mode, remove the key from the console. THE OPTIONAL CHEST PULSE SENSOR An optional chest pulse sensor offers hands-free operation as it tracks your heart rate during your workouts. To purchase the optional chest pulse sensor, call the toll-free telephone number on the front cover of this manual. To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is selected, the following information will appear in the display: The lower right part of the display will show the total number of miles or kilometers that the walking belt has moved. The lower left part of the display will show the total number of hours that the treadmill has been operated. In addition, the word "ENGLISH" for miles or the word "METRIC" for kilometers will appear in the upper left part of the display. To change the unit of measurement, press the Speed increase button. If you purchase the optional chest pulse sensor, follow the steps below to install the receiver included with the chest pulse sensor. 1. Make sure that the key is removed from the console and that the power cord is unplugged. Remove the indicated Console Screw (4) and the Access Door (73) from the back of the Console (91). When you use a cross training program, a personal trainer can guide you through your workouts; you can select any of three audio settings while the information mode is selected. In the center of the upper part of the display, an "I" (for Instruction), an "N" (for No), or a "Y" (for Yes) will appear. When "I" is selected, the voice of a personal trainer will guide you through your workouts and give detailed instructions. When "N" is selected, you will not hear the voice of the personal trainer. When "Y" is selected, the voice of the personal trainer will guide you through your workouts but will not give detailed instructions. Press the Incline decrease button to change the audio setting if desired. 2. Connect the wire on the receiver (A) to the indicated wire extending from the Console (91). Hold the receiver so the small cylinder is oriented as shown and is facing the Console Back. Attach the receiver to the plastic posts on the Access Door (73) with the two included small screws. 3. Make sure that no wires are pinched. Reattach the Access Door (73) with the Console Screw (4). Discard the other wires included with the receiver. IMPORTANT: If the words "DEMO ON" appear in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence; the buttons on the console will not operate. If "DEMO ON" appears when the information mode is selected, press the Speed decrease button so that "DEMO OFF" appears. 91 73 4 Wire Small Screws A Small Cylinder 20