ProForm 700tr Elliptical Uk Manual - Page 22

MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately. The elliptical crosstrainer can be cleaned with a soft cloth and a small amount of mild detergent. Keep liquids away from the console. Never use abrasives or solvents. HOW TO MOVE THE ELLIPTICAL CROSSTRAINER Stand in front of the elliptical crosstrainer, hold the centre handlebar firmly, and place one foot Centre Handlebar against one of the wheels. Pull the handlebar until the elliptical crosstrainer can be moved on the front wheels, and carefully move Wheel the elliptical crosstrainer to the desired loca- tion. Then, place one foot against one of the wheels and lower the ellip- tical crosstrainer. Due to the size and weight of the elliptical crosstrainer, use extreme caution whilst moving and lowering it. HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER After the elliptical crosstrainer has been moved, make sure that the ends of both stabilisers are touching the floor. If the elliptical crosstrainer rocks slightly during use, Levelling Foot turn one or both of the Levelling feet under the front Stabiliser until the rocking motion is eliminated. HANDGRIP PULSE SENSOR TROUBLESHOOTING If the handgrip pulse sensor does not function properly, see step 5 on page 13. Note: For optimal performance of the handgrip pulse sensor, keep the metal contacts clean using a soft cloth and a small amount of mild detergent. Never use alcohol, abrasives, or chemicals. 22