ProForm Pro 1000 Instruction Manual - Page 16
the two 3/8 x 1 3/4 Screws 62, and
View all ProForm Pro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
18. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (38). Align the upper end of the Storage Latch (53) with the bracket on the Latch Crossbar (38), and insert the 5/16" x 2 1/4" Bolt (3) through the bracket and the Storage Latch. This will push a spacer (N) out of the Storage Latch; discard the spacer. Next, tighten the 5/16" Nut (12) onto the 5/16" x 2 1/4" Bolt (3). Do not overtighten the Nut; the Storage Latch (53) must be able to pivot. Then, lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 28). 18 12 N 38 3 53 56 19. Firmly tighten the four 3/8" x 2 3/8" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the 19 two 3/8" x 1 1/4" Screws (63). Do not over- tighten the Screws. Set the Left Inner Base Cover (108) onto the lower end of the Left Upright (89). Then, slide 90 the Left Base Cover (82) downward and press it onto the Left Inner Base Cover. Next, set the Right Inner Base Cover (109) onto the lower end of the Right Upright (90). Then, 83 slide the Right Base Cover (83) downward and press it onto the Right Inner Base Cover. 63 7 89 82 63 108 109 62 7 62 16