ProForm Pro 1000 Instruction Manual - Page 9

Slide the Left and Right Base Covers onto

Get ProForm Pro 1000 PDF manuals and user guides View all ProForm Pro 1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright 4 Wire (81). Next, hold a Wheel (97) inside the Base (94), and insert a 3/8" x 1 3/4" Screw (62) through the Base and the Wheel as shown; do not fully tighten the Screw yet. 7  Insert two 3/8" x 2 3/8" Screws (7) with two 3/8" Star Washers (13) and a 3/8" x 1 1/4" 13 Screw (63) with a 3/8" Star Washer (13) into the bracket at the bottom of the Right Upright (90), and partially tighten the three Screws into the Base (94); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 94 13 63 90 5. Remove and save the four 5/16" x 3/4" Screws (31). 5 Identify the Left and Right Base Covers (82, 83). 89 Slide the Left and Right Base Covers onto the Left and Right Uprights (89, 90) as shown. 31 81 62 97 90 82 31 83 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
9
4.
Hold the Right Upright (90) against the Base
(94).
Make sure not to pinch the Upright
Wire (81).
Next, hold a Wheel (97) inside the Base (94),
and insert a 3/8" x 1 3/4" Screw (62) through
the Base and the Wheel as shown;
do not fully
tighten the Screw yet.
Insert two 3/8" x 2 3/8" Screws (7) with two
3/8" Star Washers (13) and a 3/8" x 1 1/4"
Screw (63) with a 3/8" Star Washer (13) into the
bracket at the bottom of the Right Upright (90),
and partially tighten the three Screws into the
Base (94);
do not fully tighten the Screws yet.
Attach the Left Upright (not shown) in the
same way.
Note: There are no wires on the left
side.
4
63
62
97
94
13
90
7
13
81
5.
Remove and save the four 5/16" x 3/4"
Screws (31).
Identify the Left and Right Base Covers (82, 83).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (89, 90) as shown.
83
90
31
82
89
31
5