ProForm Pro 4500 Treadmill English Manual - Page 11

9. Remove and discard the #10 x 3/4" Screws (3) from the Right Handrail (93) and the Left Handrail (not shown). Hold the pulse assembly near the Right Handrail (93). Insert the pulse wire from the pulse assembly into the hole in the side of the Right Handrail and out of the end of the Right Handrail as shown. 9 Pulse Wire Pulse Assembly 93 3 Hole 10. Slide the pulse assembly onto the Left and Right Handrails (92, 93). Make sure that the brackets on the pulse assembly are flush against the rubber on the Handrails. Be careful not to pinch the pulse wire against the pulse assembly. Attach the pulse assembly with four #10 x 3/4" Screws (3) and four #10 Star Washers (11). Start all four Screws, and then tighten them. 10 Pulse Wire Pulse Assembly 92 11 3 93 3 11 11. Set the console assembly face down on a soft surface to avoid scratching the console 11 assembly. Identify the Left and Right Trays (110, 111). Attach the Trays (110, 111) to the console assembly with six #8 x 1/2" Screws (1). Start all 4 six Screws, and then tighten them. Be careful 12 not to overtighten the Screws. Remove the four 5/16" x 5/8" Screws (4) and four 5/16" Star Washers (12) from the console assembly. They will be used in step 13. 1 110 1 1 1 111 4 12 Console Assembly 11