ProForm Pro 4500 Treadmill English Manual - Page 9

4. Hold the Left Upright (90) against the Base (105). Be careful not to pinch the wires. If 4 necessary, position the base ground wire (A) in the hole in the side of the Left Upright. Insert two 3/8" x 2 3/4" Screws (8) and two 3/8" x 1 1/4" Screws (9) with two 3/8" Star Washers (14) into the Left Upright. Partially tighten the 3/8" x 2 3/4" Screws (8) and the 3/8" x 1 1/4" Screws (9) until the heads of the Screws touch the Left Upright (90); do not fully tighten the Screws yet. Note: It may be helpful to use the Short Hex Key (43) on the Screw shown. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 90 8 43 Hole 14 A 9 14 105 5. Identify the Left and Right Base Covers (96, 97). 5 Slide the Left Base Cover (96) onto the Left Upright (90). Slide the Right Base Cover (97) onto the Right Upright (99). Do not press the Base Covers into place yet. 99 90 97 96 9