ProForm Strideclimber 490 Elliptical English Manual - Page 7
Attach the Left Upper Body Arm 22 in
![]() |
View all ProForm Strideclimber 490 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Have another person hold the Upright (3) in the position shown. Insert the Wire Harness (73) 3 upward through the Upright. Tip: Use an elas- tic band or tape to prevent the Wire Harness from falling into the Upright. Tip: Avoid pinching the Wire Harness (73) during this step. Insert the Upright (3) into the Frame (1). Attach the Upright with two M8 x 16mm Button Screws (53) and two M8 x 35mm Button Screws (80). Do not tighten the Button Screws yet. 3 73 80 53 1 Avoid pinching the Wire Harness (73) during this step 53 80 4. Identify the Right Upper Body Arm (36), which is marked with an "R" sticker. 4 Slide the Right Upper Body Arm (36) onto the Right Upper Body Leg (37). Attach the Right Upper Body Arm with two M8 x 30mm Button 22 Screws (67). Attach the Left Upper Body Arm (22) in the same way. 36 67 37 7
![](/manual_guide/products/proform-strideclimber-490-elliptical-english-manual-d579673/7.png)