ProForm Xp 90 Bike Exerciser English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench screwdriver . and Phillips Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 21. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. If a part is missing, call toll-free 1-888-533-1333. M6 Washer M8 Split (66)-4 Washer (55)-9 M8 Nylon Locknut (49)-4 M10 Nylon M4 x 12mm M4 x 16mm Locknut (72)-4 Screw (41)-2 Screw (57)-4 M4 x 20mm M6 x 16mm Button M6 x 20mm Button M8 x 16mm Button Screw (56)-1 Screw (8)-4 Screw (63)-3 Screw (61)-4 M8 x 38mm Button Bolt (58)-4 M8 x 19mm Button Screw (40)-5 M10 x 112mm Carriage Bolt (76)-4 1. Orient the Rear Stabilizer (16) as shown. While another person lifts the Frame Rail (52), attach the Rear 1 Stabilizer to the Frame Rail with two M10 x 112mm Carriage Bolts (76) and two M10 Nylon Locknuts (72). 76 52 16 72 4