RCA RS2100 RS2100 Product Manual-English/French/Spanish - Page 28

RS2100 EN (04_07_06) 7/7/06 11:30 AM Page 30 Maintenance Disconnect the audio system from the power source before performing any maintenance. CD Lens Care When your CD lens gets dirty it can also cause the EN Cleaning system to output poor sound quality. To clean the lens you will need to purchase a CD lens cleaner Clean the exterior of the system using a soft dust can maintain the output sound quality of your cloth. system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens cleaner. CD Player CAUTION! This system operates with a laser. It Technical Specification must be opened by only a qualified technician. Power supply: 120V~60Hz Dimensions ( H x W x D mm): Handling CDs Unit size - 280 x 187 x 310 Speaker - 278 x 185 x 229 • Do not touch the signal surfaces. Hold CDs by CD player: Response curve (+/- 2dB): 60Hz to 5kHz the edges, or by one edge and the hole. Rating Plate: Look for it at the back of the set. • Do not affix labels or adhesive tapes to the Maximum size of Mass Storage Class device label surfaces. supported: 20 GB • Do not scratch or damage the label. CDs rotate at high speeds inside the player. • Do not use damaged (cracked or warped) CDs Cleaning CDs • Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface 23