RCA RS2100 RS2100 Product Manual-English/French/Spanish - Page 7

RS2100 EN 8/8/06 4:26 PM Page 9 Getting Started Content of Box Using the FM and AM Antennas • one main unit (with 2 main speakers); Before you use your audio system, you'll want to • one Music Navigator remote control; make sure both the FM and AM antennas are • one AM loop antennas; positioned properly. Uncoil the FM antenna at EN • one mp3 Player; the back of the unit, making sure it is fully • one set of earphones; extended (you may even want to tape it to the • one USB cable; wall behind the unit if possible. The higher the • one Wireless Musiclink transceiver; better.) You'll also need to connect the AM • one user manual; antenna loop to the back of the unit if you listen • one PC software and driver installation CD-ROM; to AM stations. Rotate the AM loop antenna for • one safety leaflet; better reception. • Owner registration Card. Connecting the Speakers ! Warning: Use of this product is for your personal use only. Unauthorized recording or duplication of copyrighted material may infringe upon the rights of third parties and may be contrary to copyright laws. Each speaker has a black (negative) and a red (positive) jack. When connecting the speakers, match the red wires to the red jacks and the black wires to the black jacks. Speaker Wire Connection Note: Make sure the tracks are encoded in mp3 or Windows Media formats and supported bitrates. Bitrates supported by the player: mp3 - 32 to 320kbps wma - 48 to 160kbps Connections of Antennas and Speakers 1. Wireless Music-link antenna. 2. AM Loop antenna Jacks. 3. FM Pigtail Antenna. 4. AUX IN. 5. Main Speaker Jacks. Push Speaker terminal tab down to insert wire. Release tab to lock wire in the terminal. NOTE: Make sure the insulation is completely removed from the ends of the speaker wires at all connection points. Installation To ensure sufficient ventilation, keep the spacings shown below free from other surfaces: Front View 4 inches 4 inches 4 inches 1 2 3 4 5 Side View 2 inches 4 inches 2