RCA RT2600 User Guide - Page 14

Operating Your Receiver Your Remote Control 1. ON/OFF To turn on or off the receiver and other auxiliary compo- Please be sure you have inserted the batteries into the nents (see page 14 "Using the Remote to Control remote control (see relevant section on page 3.) You can Additional Components"). EN test it by pressing any button. If it works, the red LED will light. 2. Source Buttons To turn on and select various audio/ video sources. 3. CH+, CH- (Channel Buttons) 1 To select programmed stations (in TUNER mode). 4. VOL (Volume Buttons) 2 To adjust the volume. 13 5. MUTE To mute all audio outputs. 6. Adjustment Buttons a. Press AUDIO button to activate the control, then 3 DSP/EQ/SETUP key. 4 b. Press the left and right buttons, , the display will toggle among: SLEEP, Night mode, DIMMER, EQ and DSP. 5 c. When the display shows the setup you want to change, press the up and down arrow buttons beside OK button to make changes, then press OK to finalize your choice. 6 7. Number Buttons To access directly a pre-set station (in TUNER mode) or to 8 peripheral devices . 8. MENU (Tuner Mode only) • Press AM/FM 7 • To store Preset Stations. (For details, refer to "Storing and Recalling Stations in Memory" on page 17.) 9. Operation Buttons In TUNER mode, press AM/FM on the remote. • Press REVERSE and FORWARD keys to tune down or up the radio frequency. • PLAY, RECORD, STOP and PAUSE keys are only for easy control of external devices that are connected to your 9 receiver such as CD, VCR, DVD, TAPE, etc.. The remote con- trol currently operates most Thomson, RCA and GE prod- ucts, but it can be programmed to operate devices from other manufacturers (For details, refer to "Using the 12 Remote to Control Additional Components" on page 14. 11 10. DIGITAL 10 Select the way your audio/video components are connected to the receiver (Analog, Optical, Optical 2 (RT2600 only) or Coaxial). In TUNER mode, press to toggle between Stereo and Mono sound. * 6 channels mode is available on RT2600 only. NOTE The remote buttons GO BACK•DISC, GUIDE•RDM•PTY, INFO•RDS, INPUT•SEEK & AUDIO do not work in tuner mode. 11. LEVEL Press to adjust the volume of each speaker. Press repeatedly and the display will toggle among different channels (Left front speaker, Right front speaker, Center speaker, Left rear speaker, Right rear speaker, and Subwoofer). Press the VOLUME up and down arrow buttons for adjustment.. 12. SURR (Surround Sound Control) Press to change the surround sound settings. The display will toggle among DOLBY DIGITAL, DOLBY PROLOGIC, DOLBY PL2 MOVIE (RT2600 only), DOLBY PL2 MUSIC (RT2600 only) , DTS (RT2600 only), STEREO. 13. LED indicator Lights up whenever a key on the remote control is pressed. 11