RCA RTB1016 RTB1016 Product Manual - Page 21

Radio This unit has a built-in digital-tuning FM radio. Manual tuning 1. Connect the FM antenna at the back of the unit. 2. Press TUNER button. 3. Tune a station by pressing TUNE / buttons repeatedly until the desired station is found. Alternatively, you can press and hold the same button down for about two seconds to activate the automatic search function. In this mode the unit will automatically tune frequencies until it finds a station. 4. Repeat step 3 to tune to another radio station. Automatic preset programming 1. Press TUNER button to enter Tuner mode. 2. Press and hold TUNER button for two seconds to start automatic preset programming. 3. Radio frequencies will be scanned and stored automatically. When all the available radio stations are stored or all 30 FM memory locations are full, the auto preset programming function will stop. Manual preset 1. Tune to a radio station (see Manual tuning for details). 2. Press MEM/ANGLE button. While the Program Preset number is still flashing, input your desired preset number using the numeric buttons, then press MEM/ANGLE button to store it. Retrieving preset stations 1. Press TUNER button to enter the Tuner mode. 2. Press / buttons to search up or down for the preset stations or directly press the numeric buttons. Tips: • When a strong FM signal is tuned, ST is displayed. • If there is any interference, change the antenna's position until ideal sound reception is obtained. TV and other electronic devices could be the cause of interference, so try to position the antenna away from them. • A weak signal can affect the Automatic preset programming function's efficiency. Adjust the antenna for better reception and a more efficient search. EN-20