Reebok Rt1000 Treadmill Uk Manual - Page 12
The Information Mode/demo Mode
View all Reebok Rt1000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
7 When you are finished exercising, remove the key. Step onto the foot rails and press the start/stop button. Next, change the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the storage position or the treadmill will be damaged. Remove the key from the console and put it in a secure place. Finally, move the on/off switch to the off position and unplug the power cord. (See the drawing on page 5.) THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometres per hour and to turn the demo mode on and off. To select the information mode, hold down the start button whilst inserting the key into the console. When the information mode is selected, the following information will be shown: The Distance/laps display will show the total number of miles that the walking belt has moved. The Time/pace display will show the total number of hours the treadmill has been used. An "E," for english miles, or an "M," for metric kilometres, will appear in the speed display. Press the speed L button to change the unit of measurement. IMPORTANT: The Cals/fat cals/pulse display should be blank. If a "d" appears in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a "d" appears in the cals/fat cals/pulse display when the information mode is selected, press the speed M button so the display is blank. To exit the information mode, remove the key from the console. 12