Reebok Trainer Rx 3.0 Cwl Bike English Manual - Page 8

5. The Console (4) can use four D batteries (not 5 included); alkaline batteries are recommended. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the indicated screw, remove the battery cover, and insert batteries into the bat- tery compartment. Make sure to orient the batteries as shown by the diagrams inside the battery compartment. Then, reattach the battery cover. To purchase an optional power adapter, call the telephone number on the front cover of this manual. To avoid damaging the console, use only a manufacturer-supplied power adapter. Plug one end of the power adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screw Battery Cover Batteries 4 Batteries 6. While another person holds the Console (4) near the Upright (2), connect the wire harnesses on the Console to the Wire Harnesses (42, 43); make sure to connect the console wire that has a tag to the game wire that has a tag. Insert the excess wire downward into the Upright. Tip: Do not pinch the Wire Harnesses (42, 43). Set the Console (4) on the Upright (2). Press the Console upward so that the lower edge of the indicated bracket is inserted into the back of the Console. Make sure that the holes in the Console and the holes in the Upright are aligned. Attach the Console (4) to the Upright (2) with four M4 x 16mm Flange Screws (80). 6 4 Bracket Avoid pinching the Wire Harnesses (42, 43) 43 42 2 80 80 8