Ricoh 002052MIU User Guide - Page 110
Signs And Measures At Poor Toner Cartridge, Fault
![]() |
UPC - 026649118692
View all Ricoh 002052MIU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
TONER CARTRIDGE (AIO) SERVICE 4.11.3 SIGNS AND MEASURES AT POOR TONER CARTRIDGE Fault Light image and partially blank image Signs • The printed image is light or unclean and untidy. • Some part of the image is not printed. . Cause & Check 1. If the image is light or unclean and untidy printed image -Shake the cartridge and then recheck. NG: Check the weight of the cartridge OK: Lack of toner Solution 1. All of 1, 2, 3 - • The weight of the cartridge ended: 800g ± 20g • If it becomes better by shaking, replace with a new cartridge. • Periodically a noise as "tick tick" occurs. 2. Some part of image is not printed - Shake the cartridge and then recheck. NG: Check the weight of the cartridge and clean the Laser Scanning Unit (LSU) window with a cotton swab, then recheck. OK: Lack of toner 2. In case of 2if it becomes better after cleaning the LSU window, then the cartridge is normal. (Because of foreign substance on the LSU window, the image has not been printed partly.) 3. Periodically a noise as "tick tick" occurs Measure the cycle and the weight of the cartridge. 4. White vertical stripes on the whole screen or partly: Check the weight of the cartridge. 3. In case of 3If the cycle of noise is about 2 seconds, the toner inside the cartridge has been nearly exhausted. (Purchase and replace with a new cartridge after using about 200 sheets at the point of occurrence.) 4. In case of 3This is a phenomenon caused by lack of toner, so replace with a new cartridge. B173 4-44 SM
![](/manual_guide/products/ricoh-002052miu-user-guide-6d66544/110.png)