Ricoh 002052MIU User Guide - Page 120
Data Set-up, Send Level, Dialing Mode, Modem Speed, Error Rate, Notify Toner
UPC - 026649118692
View all Ricoh 002052MIU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
TECH MODE 5.2.3 DATA SET-UP SEND LEVEL You can set the level of the transmission signal. The Tx level must be less than -12 dBm. CAUTION: The send fax level is set at the factory. Do not change this in the field. DIALING MODE Select the dialing mode according to the user's line status. • TONE: Electrical type of dial • PULSE: Mechanical type of dial MODEM SPEED You can set the maximum modem speed. Communication is automatic when modem speed sets at lower speed. Keep the default at 33.6 Kbps. ERROR RATE The baud rate automatically goes to 2400 bps when the error rate is not the same as the set value. This keeps the error rate below the set value. You can set the rate between 5% and 10%. NOTIFY TONER With this feature enabled, when the toner becomes low, the toner low information will be sent to a specified contact point, for example, the service company. After you access this menu, select ON, and when the LCD-prompts, enter the name and the number of the contact point, the customer's fax number, the model name, and the serial number. B173 5-4 SM