Ricoh 002052MIU User Guide - Page 69
Clearing Jams, 2.1 Clearing Paper Jams
![]() |
UPC - 026649118692
View all Ricoh 002052MIU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CLEARING JAMS 4.2 CLEARING JAMS Occasionally, paper can be jammed during a print job. Some of the causes include: • The tray is loaded improperly or overfilled. • The tray has been pulled out during a print job. • The front cover has been opened during a print job. • Paper was used that does not meet paper specifications. • Paper that is outside of the supported size range was used. If a paper jam occurs, the On Line/Error LED on the control panel lights red. Find and remove the jammed paper. If you don't see the paper, open the covers. Do not use a pinset or a sharp metal tool when removing a jam. 4.2.1 CLEARING PAPER JAMS If paper jams occur, " PAPER JAM " appears on the display. Refer to the table below to locate and clear the paper jam. PAPER JAM 0: In the paper feed area PAPER JAM 1: In the paper exit area PAPER JAM 2: In the fuser area or around the toner cartridge BYPASS JAM: In the Bypass tray Troubleshooting Paper Jam 0 B173T939A.WMF Paper Jam 1 B173T939B.WMF MP Sensor Paper Jam 2 B173T939C.WMF Bypass Jam B173T939D.WMF Follow the steps below to clear a jam. To avoid tearing the paper, pull the jammed paper out gently and slowly. SM 4-3 B173
![](/manual_guide/products/ricoh-002052miu-user-guide-6d66544/69.png)