Ricoh 3200SF User Guide - Page 64
Cleaning the scan unit, Maintaining the toner cartridge
UPC - 026649028830
View all Ricoh 3200SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3 With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity. Note While cleaning the inside of the machine, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from your fingers can cause print scan quality problems. 4 Locate the long strip of glass (LSU) inside the top of the cartridge compartment, and gently swab the glass to see if dirt turns the white cotton black. Cleaning the scan unit Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day, as needed. 1 Slightly dampen a soft lint-free cloth or paper towel with water. 2 Open the scanner lid. 3 Wipe the surface of the scanner glass and ADF glass until it is clean and dry. 1 3 2 4 5 Reinsert the toner cartridge and close the front cover. 6 Plug in the power cord and turn the machine on. 1 white sheet 2 ADF glass 3 scanner lid 4 scanner glass 4 Wipe the underside of the scanner lid and white sheet until it is clean and dry. 5 Close the scanner lid. Maintaining the toner cartridge Toner cartridge storage To get the most from the toner cartridge, keep the following guidelines in mind: • Do not remove the toner cartridge from its package until ready for use. • Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled cartridge. • Store toner cartridges in the same environment as your machine. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. 13.3