Ricoh 8100DN Software Guide - Page 203
dhcp, Current interface priority configuration display
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Remote Maintenance by telnet dhcp Use the "dhcp" command to configure DHCP settings. ❖ View settings The following command displays the current DHCP settings. msh> dhcp ❖ Configuration You can configure DHCP. msh> dhcp "interface_name" {on|off} • Click {on} to enable DHCP. Click {off} to disable DHCP. • If the DNS server address and domain name are obtained from DHCP, be sure to click {on}. • wlan can be specified only when the IEEE 802.11b interface unit and the optional SDRAM module are installed. 5 Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b interface ❖ Current interface priority configuration display msh> dhcp priority ❖ Interface priority configuration msh> dhcp priority "interface_name" • You can select which interface has DHCP parameter priority. • Priority settings are available when multiple interfaces are installed. ❖ DNS server address selection msh> dhcp dnsaddr {dhcp | static} • Specify whether to obtain the DNS server address from the DHCP server or use the address set by a user. • To obtain the DNS server address from the DHCP server, specify "dhcp". To use the address set by a user, specify "static". ❖ Domain name selection msh> dhcp domainname {dhcp | static} • Specify whether to obtain the domain name from the DNS server or use the domain name set by a user. • To obtain the domain name from the DHCP server, specify "dhcp". To use the domain name set by a user, specify "static". 191