Ricoh 8100DN Software Guide - Page 262
To quit, To start, Print Server Configuration Menu
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Using a Printer Server I From the [Print Server Information] menu, select [Print Server Configuration]. J From the [Print Server Configuration] menu, select [Printer Configuration]. K Select the printer indicated as [Not Installed]. L To change the printer name, enter a new name. A name "Printer x" is assigned to the printer. The "x" stands for the number of the selected printer. M As type, select [Remote Parallel, LPT1]. The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured. N Press the {Esc} key, and then click [Yes] on the confirmation message. O Press the {Esc} key to return to [Print Server Configuration Menu]. P Assign print queues to the created printer. Q From [Print Server Configuration Menu], select [Queues Serviced By Printer]. 6 R Select the printer created. S Press the {Insert} key to select a queue serviced by the printer. You can select several queues. T Follow the instructions on the screen to make other necessary settings. Following these steps, check that the queues are assigned. U Press the {Esc} key until "Exit?" appears, and then select [Yes] to exit PCONSOLE. V Start the print server by entering the following from the console of the Net- Ware server. If the print server is in operation, quit and restart it. ❖ To quit CAREE: unload pserver ❖ To start CAREE: load pserver "print_server_name" Note ❒ If the printer works as configured, the message "Waiting for job" appears. 250