Ricoh 8100DN Software Guide - Page 326
Using DHCP, When obtaining addresses from the DHCP server
![]() |
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
Appendix Using DHCP You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a WINS server when it is running. Note the following points when an Ethernet interface is simultaneously installed. ❖ When static IPv4 addresses are set for each interface • IPv4 address: When set at the same value, the Ethernet interface is preferred. • Subnet mask: When a value overlaps, the Ethernet interface is preferred. • Gateway address: The value set is used. For the gateway address, set the gateway address located in the subnetwork set by the interface. If the value is outside the subnet range set by the interface, it operates as "0.0.0.0". ❖ When obtaining addresses from the DHCP server • IP Address, Subnet Mask: you can configure addresses assigned by a DHCP server. If IPv4 addresses overlap or the same subnet IP addresses are selected, the effective value is assigned only to the prioritized interface. Ethernet has default interface priority. • AutoNet: A temporary IPv4 address starting with 169.254 and not used on the network, is assigned to the prioritized interface. • Gateway Address, DNS Server Address, and Domain Name: You can configure the addresses assigned by DHCP to the prioritized interface. If the gateway address is beyond the range of the subnet selected for the interface, the printer operates using "0.0.0.0". Ethernet has default interface priority. 9 ❖ When there are static IPv4 addresses and addresses assigned by DHCP • IPv4 Address and subnet mask: if a static IPv4 address is the same as an address assigned by DHCP, or the static subnet mask address and the subnet mask address assigned by DHCP overlap, the printer uses the static IPv4 address interface. The interface with the DHCP setting is set by default. • Gateway Address: operates using the address entered manually. If a static address is not selected, or is set to 0.0.0.0, the interface using the address assigned by DHCP is used. 314
![](/manual_guide/products/ricoh-8100dn-software-guide-b53f1fe/326.png)