Ricoh AP610N Maintenance Manual - Page 21

Loading Paper

17

1

E

Press the

{U}

or

{T}

key to dis-

play the loaded paper size, and

then press the

{

# Enter

}

key.

After about two seconds, the dis-

play returns to the menu.

F

Press the

{

Online

}

key.

The initial screen appears.

This completes the setting change.

Specifying custom size paper for the

optional paper feed unit

Important

❒

When printing on custom size pa-

per, specify the paper size using

the control panel or printer driver.

❒

The custom size paper selected us-

ing the printer driver overrides

that selected using the control pan-

el. Do not make settings using the

control panel if you have already

made settings using the printer

driver. However, when printing

with a printer driver other than the

RPCS printer driver, you must

configure the settings using con-

trol panel.

❒

The following is the range of paper

sizes that can be loaded in each

type of the paper trays:

•

Optional paper feed unit (Tray

2, Tray 3): 182 - 297 mm in width

and 60 - 432 mm

❒

The printer cannot print from ap-

plications that do not support cus-

tom size paper.

A

Press the

{

Menu

}

key.

The

[

Menu

]

screen appears on the

display.

B

Press the

{U}

or

{T}

key to dis-

play

[

Paper Input

]

, and then press

the

{

# Enter

}

key.

The paper selection menu appears.

C

Press the

{U}

or

{T}

key to dis-

play

[

Tray Paper Size

]

, and then

press the

{

# Enter

}

key.

The paper tray selection menu ap-

pears.

D

Press the

{U}

or

{T}

key to dis-

play the target paper tray, and

then press the

{

# Enter

}

key.

The paper size selection menu ap-

pears.

E

Press the

{U}

or

{T}

key to dis-

play

[

Custom Size

]

, and then press

the

{

# Enter

}

key.

Tray 2:

8 1/2 x 13

Menu:

Paper Input

Tray Paper Size:

Tray 2

AGN503S

Ricoh AP610N Maintenance Manual - Page 21

Tray 2, 1/2 x 13, Paper Input, Tray Paper Size, Tray 2 - printer drivers

Page 21 highlights