Ricoh FW780 Service Manual - Page 377

Service Tables SERVICE TOOLS Mode No. Function Data Length Size *17 Magnification Adjusts the speed of the original feed motor (B048 copier only). The setting can be changed by the key operation. -1.0 ← 0.0 → 1.0 Shorter Longer Semi-synchro Cut Original Scanning Mode *18 Sets the cutting method for semisynchro cut mode (B047 copiers only). When using the default method, the user must manually press the roll paper cut key as the trailing edge of the original passes the table's edge. When using the alternate method, the user feeds the original once, and the original length is measured. The user 0: Pressing the roll paper cut key 1: Inserting the original again then feeds the original a second time, and it is scanned and copied. The copy is automatically cut to the appropriate length. Synchro-cut Length Adjusts the cut length in the semi- -25 ← 0 → 25 Adjustment synchro cut mode (B047 copier). Shorter Longer *19 Adjusts the cut length in the synchro 1 mm/step cut, preset cut, and variable cut modes (B048 copier). The setting can be changed by a key operation. Paper Length *20 Count Up/Down Setting Determines weather the paper length cycles down (to smaller sizes) or up (to larger sizes) when the preset cut key is pressed. 0: Down 1: Up Paper Length Up/Down Speed Setting *21 This sets the speed at which the paper length setting increases or decreases. When the customer holds down the + or - key, there is a brief pause. After a selected number of 0.25 second intervals (See SP12), the values begin to change at the selected speed. 0: 0.10 second 1: 0.5 second 2: 0.25 second 3: 0.05 second 4: 0.02 second 5: 0.01 second Fixed Paper Size *22 Pattern Setting Selects the fixed paper size pattern chosen when the "Preset Cut" key is pressed. Refer to page 4-24. Optional Paper *23 Size Setting to *32 Up to 10 different paper size can be stored in SPs 23 to 32. If "19" is selected in SP No. 22, these values are used when the "Preset Cut" key is pressed. UdEF: Undefined *33 AOF Auto off enable. 0: Disable 1: Enable *34 Start Key Enable Select whether the start key can be used as a start trigger. 0: Disable 1: Enable All Indicators ON 35 Turns ON all indicators on the operation panel when the Roll Feed Select key is pressed. 0: No 1: All indicators on SM 4-3 B047/B048