Ricoh FW780 Service Manual - Page 70

8.5 ENERGY SAVER FUNCTION When the copier is not in use, the energy saver function reduces the power consumption by decreasing the fusing temperature. When the Clear Modes/Stand-by key is hold down for over 2 seconds, the copier goes into the energy saver mode. A message is displayed on copy counter and all the other indicators turn off. The fusing temperature is decreased by 15°C from one of the normal mode settings for copying. The energy saving ratio is approximately 14%. The waiting time until the copier returns to the ready condition is approximately 60 seconds. NOTE: The above energy saving ratio is a standard value measured in laboratory tests under controlled conditions. The actual ratio will vary depending on environmental conditions, copy modes, power supply conditions and measurement instruments. Press the Clear Mode/Standby key. The copier is returned to the ready condition after a warm-up time. When the auto energy saver mode (SP #10) is selected, the copier automatically goes to the energy saver mode at the auto reset time selected by SP #9. SM 2-34 A163