Ricoh M 320F Setup Guide - Page 11

Connecting to devices using the WPA2-PSK or, Mix Mode WPA2/WPA authentication, Printer Driver.

Get Ricoh M 320F PDF manuals and user guides View all Ricoh M 320F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

™ M 320 1. Check that the router (access point) is working correctly. 2. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi) connection is enabled. For details, see page 6 "Attaching the wireless LAN option". 3. Press the [ ] or [ ] key to select [Network Setup], and then the [OK] key. Other Setup 12 Network Setup Quit Setup M0ESIC0010 4. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then the [OK] key. Network Wizard 12 Wired (Ethernet) Wireless (Wi-Fi) DYG071 5. Press the [ ] or [ ] key to select SSID of the router (access point) from the searched SSID list, and then press the [OK] key. Wi-Fi Setup Wizard 1 13 Network 1 Network 2 Network 3 ECB241 The next steps differ depending on the authentication method that you have selected. Proceed to Step 6 of the appropriate section. • If the authentication method is set to [WPA2-PSK] or [Mixed Mode WPA2/WPA] • If the authentication method is set to [Open system] or [Shared Key] • If the authentication method has not been configured, proceed to Step 7. Connecting to devices using the WPA2-PSK or Mix Mode WPA2/WPA authentication 6. Enter the encryption key using the number keys, and then press the [OK] key. Password Key : (8-63 chars/64 hex) WPA2-PSK ECB225 As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f). For details about checking the encryption key, see "Checking the SSID and Encryption key". 7. Press the [OK] key. Are you sure to connect? (OK/Back) ECB226 8. Check the result. Connection has succeeded: Connect succeed! DSG355 Connection has failed: Connect failed! DSG356 9. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. 10. Press the [ ] or [ ] key to select [Yes], and then the [OK] key. Network Wizard Do not auto display Menu from next time Yes No M0ESIC0014 11. Configuring the Wireless (Wi-Fi) settings is complete. To use the printer driver, install the printer driver according to the procedure on page 19 "4. Installing the Printer Driver". 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
9
±
M 320
1.
Check that the router (access point) is working correctly.
2.
Make sure the wireless LAN option is attached to the
machine and the wireless (Wi-Fi) connection is enabled.
For details, see page 6 "Attaching the wireless LAN option".
3.
Press the [
] or [
] key to select [Network Setup], and then
the [OK] key.
Other Setup
12
Network Setup
M0ESIC0010
Quit Setup
4.
Press the [
] or [
] key to select [Wireless (Wi-Fi)], and
then the [OK] key.
Network Wizard
12
Wired (Ethernet)
DYG071
Wireless (Wi-Fi)
5.
Press the [
] or [
] key to select SSID of the router (access
point) from the searched SSID list, and then press the [OK]
key.
Wi-Fi Setup Wizard
1 13
Network 2
Network 3
ECB241
Network 1
The next steps differ depending on the authentication method
that you have selected. Proceed to Step 6 of the appropriate
section.
• If the authentication method is set to [WPA2-PSK] or [Mixed Mode
WPA2/WPA]
•
If the authentication method is set to [Open system] or [Shared Key]
• If the authentication method has not been configured, proceed to
Step 7.
Connecting to devices using the WPA2-PSK or
Mix Mode WPA2/WPA authentication
6.
Enter the encryption key using the number keys, and then
press the [OK] key.
ECB225
WPA2-PSK
(8-63 chars/64 hex)
Key :
Password
As the passphrase, you can enter either 8 to 63 ASCII
characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).
For details about checking the encryption key, see "Checking the
SSID and Encryption key".
7.
Press the [OK] key.
ECB226
(OK/Back)
Are you sure to connect?
8.
Check the result.
Connection has succeeded:
DSG355
Connect succeed!
Connection has failed:
DSG356
Connect failed!
9.
Press the [
] or [
] key to select [Quit Setup], and then the
[OK] key.
10. Press the [
] or [
] key to select [Yes], and then the [OK]
key.
Network Wizard
Do not auto display
Menu from next time
Yes
No
M0ESIC0014
11. Configuring the Wireless (Wi-Fi) settings is complete.
To use the printer driver, install the printer driver
according to the procedure on page 19 "4. Installing the
Printer Driver".