Ricoh M 320F Setup Guide - Page 12

Connecting to the devices using the Open system or Shared Key authentication 6. Enter the encryption key and ID using the number keys, and then press the [OK] key. Password Key: (5 - 26) ID: (Enter 1-4) Shared Key M0ESIC0013 For details about checking the encryption key, see "Checking the SSID and Encryption key". The ID is used for identifying the encryption key. You can register four encryption keys (ID 1 to 4). 7. Press the [OK] key. Are you sure to connect? (OK/Back) ECB226 8. Check the result. Connection has succeeded: Easy Setup Using the WPS Button ™ M 320FB/320F ● Make sure the Ethernet cable is not connected to the machine. ● In Steps 7 to 9, configure each setting within two minutes. The following item is necessary to set up a Wireless (Wi-Fi) connection. ● Router (access point) 1. Check that the router (access point) is working correctly. 2. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi) connection is enabled. For details, see page 6 "Attaching the wireless LAN option". 3. Press [Quick Setup]. For details about [Detailed Setup], see User's Guide. Connect succeed! DSG355 Connection has failed: Connect failed! ECC292 4. Press [Change Wi-Fi Connection Mode]. DSG356 9. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. 10. Press the [ ] or [ ] key to select [Yes], and then the [OK] key. Network Wizard Do not auto display Menu from next time Yes No M0ESIC0014 ECC293 5. Press [WPS]. 6. Press [PBC]. 11. Configuring the Wireless (Wi-Fi) settings is complete. To use the printer driver, install the printer driver according to the procedure on page 19 "4. Installing the Printer Driver". 7. Press [Connect]. "Please wait for 2 minutes" appears, and the machine starts to connect in PBC method. 8. Press the WPS button on the router (access point) within two minutes. WPS CHV607 • For details about how to use the WPS button, refer to the manuals for the router (access point). 10